Release Notes

3.6.1 (2026-11-15)

Bug Fixes

  • plugin: hide note property suggestions behind capture modals
  • plugin: stop clamping number inputs on every keystroke

3.6.0 (2026-11-04)

File names for capture targets with a note type

A capture target with an Obsidian Starter Kit note type had no File name setting. The note was always named after the note type: its prefix, the date and its suffix. So two targets of the same note type, or a target and a note made by another tool, wanted the same name on the same day. My small exercises (“Through the day”) and my gym session are both strength sessions, and both wanted 2026-11-03 (Strength Session).

Now, a target with a note type has its own, optional File name. It sets the text around the date:

  • The note type still adds its prefix and suffix, and still gives the folder, the template and the tags. ` Through the day, with the suffix (Strength Session), gives 2026-11-03 Through the day (Strength Session)`.
  • Typed the note type’s prefix or suffix in the file name too? It isn’t added twice. Only a whole word is removed: with the suffix ` Log, Gym log loses its log, and Backlog` stays as it is.
  • An empty file name, or `` alone, gives the note type’s usual name.
  • A file name without `` is ignored, and the note type’s name is used. Problems, in the target’s settings, tells you so.
  • Problems also lists the names capture would refuse, and capture refuses them with the same message: unknown tokens (), date formats (), / or \ (the folder comes from the note type), : ? * " < > |, # ^ [ ], and a name that ends with a dot. Only the text you type is checked, never the note type’s own prefix and suffix.
  • The plugin still finds the day’s note by its note type, match filter and date property. The name plays no part in that.

Targets without a note type keep their own File name, which works exactly as in 3.5.0: / still makes subfolders (/), and # and a trailing dot are still accepted. Problems may now warn you about a name that capture already refused. The settings page shows the File name of the current mode only, and switching modes doesn’t copy one into the other.

Nothing changes when you upgrade. Your targets with a note type keep their usual names. A File name you set on a target before you switched it to a note type is ignored, and comes back if you switch the target back. To add text around the date, type it in File name ( Through the day).

On Obsidian Sync, a device with an older version ignores this File name and keeps the note type’s usual name. If that device saves its Life Tracker settings, the File name of those targets is lost: older versions keep only the capture target settings they know.

3.5.0 (2026-11-03)

Lines stop at gaps in your data

Take a running pace card with no runs from December to February. The chart used to draw one straight line across the whole winter, and a moving average turned it into a flat stretch.

Now, line and area charts on a date axis (Date, or Date, one point per note) stop the line when two points are further apart than 3 times the usual spacing, or 14 days, whichever is longer. For daily data, that’s a break of more than two weeks.

  • The line, the area below it and the moving average all stop at the gap. The average starts again after it, and never mixes values from both sides.
  • It’s on by default, for your existing cards too. To keep one continuous line, set Break line across gaps to Off in the card’s right-click menu (breakLineAcrossGaps: false in the .base file).
  • Overlays keep one continuous line for now, and the overlay editor doesn’t have the two new switches.

Leave outliers out of the average

One bad entry (a treadmill run logged at 49997 seconds per kilometer) could drag the moving average off the chart for a whole window. New switch in the card’s right-click menu, next to Outliers: Leave outliers out of the average (excludeOutliersFromAverage: true). It’s off by default.

When it’s on, the moving average and the trend ignore the outliers. They stay on the chart (as triangles at the edge on a fitted scale), and records and CSV export still use them. Line, bar and area cards have it.

Outliers when most values are the same

Meditation minutes of 10, 10, 10 … plus one typo of 1000 still got a 0 to 1000 axis. Now, when most values are equal, a value more than 10 times the usual one counts as an outlier. Only high values count: a missed day is real data.

Checkbox properties, and any series of only 0s and 1s, never have outliers. A yes/no habit is drawn exactly as you logged it.

Edits to the .base file stick

If you edited a .base file while its Life Tracker view was open (say, adding timeFrame: last-365-days), the view could later write its old settings back over your edit. Now it re-reads its time frame and number of columns on every redraw, and saves a setting only when you change it in the view’s toolbar (and only that one).

3.4.0 (2026-11-03)

Charts that stay readable on real data

My running Base has about 170 session notes, and its pace card was unreadable. One mistyped value (49997 seconds) set the scale to 0 to 50,000, so every real run sat in a flat line at the bottom. 170 point markers overlapped. Every label on the axis was a long, rotated note name like 2025-06-24 (Running Session). And my pace read 387 instead of 6:27.

This release fixes each of those. Three changes apply to your charts on their own: outliers no longer set the scale, note-name labels get shorter, and dense lines drop their point markers. The rest is opt-in from the card’s right-click menu.

Durations read as times

New Value format setting in the card’s right-click menu:

  • Duration: seconds as m:ss: a pace of 387 reads 6:27. From one hour on, you get h:mm:ss (3725 reads 1:02:05).
  • Duration: minutes as h:mm: 95 minutes of sleep reads 1:35.

The format shows everywhere the card shows a value: axis ticks (on round times such as 5:00, 5:30, 6:00), tooltips, the moving average, reference line and target labels, the record chip (“Record: 5:12”), heatmap tooltips and progress ring amounts. On line and area charts, a duration axis fits your data instead of starting at zero, so a pace between 5:00 and 7:00 fills the chart.

It’s offered on heatmap, line, bar, area, scatter, bubble and progress cards, and on overlays (in the overlay editor). It’s saved in the .base file as valueFormat: duration-mm-ss or valueFormat: duration-h-mm.

One bad value no longer sets the scale

Line, bar and area charts with an Auto-detect scale now fit their axis to the bulk of your data. A value far outside it is drawn at the edge, with a small triangle (pointing up for a value above, down for a value below). Hover it to see the real value, marked “outside the scale”. Click it to open the note and fix the typo.

“Far” means more than three interquartile ranges beyond the middle half of the values, checked from 8 values on. Ordinary highs and lows stay on the scale.

Want the full range back? Set Outliers to Show all values in the card’s right-click menu or in the overlay editor (outliers: show-all in the .base file). A preset or custom scale always wins.

Date, one point per note

New choice under X-axis for line, bar and area charts: Date, one point per note (xAxisSource: date-per-note). Every note sits at its own date, on an axis where distance is time. Nothing is grouped: two runs on one day are two points, and a three-week break shows as a three-week gap. Date labels are short, horizontal, and never overlap.

  • Notes without a date can’t be placed. The card says how many were left out (“3 notes without a date”).
  • Two notes from the same day sit side by side within that day, so you can hover and open each one.
  • The tooltip shows the date and the note name.
  • Bar charts get bars 3 to 16 pixels wide.
  • The moving average and the trend follow your notes in date order.
  • Export CSV writes one row per note: its date, its full name, then the value.

Shorter labels, fewer markers, a clearer average

  • Note name axis: labels leave off a trailing type suffix (2025-06-24 (Running Session) reads 2025-06-24) and are thinned out instead of overlapping. The tooltip keeps the full name.
  • Line and area charts with more than 40 points draw just the line, without point markers (the limit was 500). The point under your cursor still shows, with its tooltip.
  • With a moving average on, the average becomes the main line: solid, thicker, on top, and first in the legend and tooltip. Your raw values stay visible as a thin, faded line behind it. On the per-note axes it’s a “7-note average”.

Card titles

Several cards on one property (a “Run days” heatmap, a progress ring, a “Distance per run (km)” chart) all showed the same name. Now you can right-click a card, choose Card title…, type a title and select Apply. Leave it empty to show the property name again. A card without a title keeps showing the property’s current name, as before.

The title shows in maximized mode and names your exports, and a progress ring still adds its goal after it (“Run days · ≥ 3/week”). It’s saved as title on the card in the .base file.

Fixes

  • On the Note name axis, the trend row compares notes: “vs previous 7 notes”, not “periods”.
  • Edits to an overlay (value format, outliers, aggregation, reference lines) show as soon as you save, without reopening the Base.
  • With a running total on the Note name axis, the cumulative target line isn’t drawn anymore: that axis has no time, so the line had no honest slope.

Good to know

  • Export CSV keeps the raw numbers (387, not 6:27), so a spreadsheet can still compute with them. Values drawn at the edge of the axis are exported with their real value.
  • Every card has a displayName in the .base file, written automatically. It isn’t shown as the card’s title. To name a card, use Card title….
  • On the Date, one point per note axis, the tooltip shows the point nearest to your cursor.
  • Two known limits: a series that is nearly always the same value (10, 10, 10 and one 1000) still gets the full axis (#187), and an open Base can write its old settings over a hand edit of the .base file, so close it before you edit the file (#189).

3.3.0 (2026-11-03)

Capture into a note other than the daily note

Until now, everything you captured landed in the daily note: quick add, quick-add links and “Capture today” all wrote there. Fine for mood or sleep. Less so for data that belongs to a session.

Here’s my own case. I do small exercises through the day: push-ups, planks, squats. I want them in one strength session note per day (2026-11-03 (Strength Session), with workout_kind: Through the day), in the same folder as the gym sessions Garmin syncs for me. Those gym sessions must never receive the push-ups.

This release adds capture targets for that.

  • New page: Settings → Life Tracker → Capture targets. A target is a note type (an Obsidian Starter Kit note type, or a folder and file name), a match filter such as workout_kind = Through the day, an optional template and a date property (date by default).
  • Each property gets a Capture into setting: automatic, the daily note, or a capture target. Automatic sends a property imported from a Starter Kit note type to the target of that note type.
  • The plugin finds the day’s note by its type, its match filter and its date property. Another note of the same type on the same day (my Garmin session) is never used.
  • No note yet? With Create missing notes when capturing on, the plugin asks first, then creates it from its template. If the file name is taken, it picks the next free one (2026-11-03 2 (Strength Session)). It then writes the date, the match filter values and the tags, even without Templater. The note is dated by its date property, so you don’t get the “will not appear in your views” warning for it.
  • “Capture today” now lists only the properties that go to the daily note.

No capture targets? Then nothing changes for you.

One command per target, ready for a button

Each target adds its own command: Capture today: <target name>. The target’s settings show the command id, life-tracker:capture-today-target-<id>, so you can run it from a button, a hotkey or any plugin that runs commands. Renaming the target keeps the id, so your button keeps working.

In my vault, a Meta Bind button in my daily note template, 💪 Small exercises, runs that command. One tap opens the capture dialog on today’s “Through the day” note, and offers to create the note first when it doesn’t exist yet.

Quick add, grouped by note

  • The quick-add panel now groups its rows by note: the daily note, then each capture target. Each group has its own Full capture button, and a Create note button when its note doesn’t exist yet (with Create missing notes when capturing on). With only the daily note, the panel looks exactly like before.
  • Quick-add links write into the note of the property’s capture target. Your links don’t change: once push-ups go to a target, the same push-ups link writes there.
  • New link action append=<value>: adds one entry to a list (or tags) property. For example, append=12@60 logs a set of 12 reps at 60 kg.

Goals: “Days with a value”

A new measure for goals: the number of days with at least one non-zero value. Two notes on the same day count as one day, so a “3 days a week” goal stays right when a gym session and a “Through the day” session share a day.

“Entries with a value” still counts notes, and your existing goals don’t change.

Fixes

  • Notes created from a Starter Kit note type keep the spaces of the name prefix and suffix: 2026-11-03 (Strength Session), not 2026-11-03(Strength Session).
  • Values captured into a daily note the plugin had just created from its template could be lost: Templater could process the new note a second time and overwrite them. The plugin now keeps Templater away from a note it has just created.
  • Turning the plugin off and on again quickly, or a hot reload, could fail with “Action life-tracker-quick-add is already registered”. That no longer happens.
  • The documentation was wrong about dates. With a Date anchor property set in a view, that property comes first, before the file name. The plugin already worked that way; the docs now say so.

3.2.0 (2026-10-14)

Saturday as the first day of the week

First day of the week (Settings → Dates) now offers Saturday next to Monday and Sunday. Weekly grouping, heatmap week columns and day labels, and “this week” / “last week” ranges all follow it. ISO week labels (2026-W42) stay Monday-based.

Settings changed elsewhere are no longer overwritten

When data.json changed outside Obsidian (Obsidian Sync, a git pull, a hand edit) while the plugin was running, the next settings change wrote the old settings back and silently discarded the external change. The plugin now reloads its settings when the file changes on disk, refreshes open views and an open settings tab, and never writes during the reload. A file caught mid-write by a sync tool, or briefly missing, is ignored instead of resetting your settings. Thanks to Andrii Oriekhov.

Multi-line property descriptions

A description written one line per value (none — no headache, mild — …) now keeps its line breaks in the capture dialog instead of turning into one run-on line. Used as an input’s placeholder, its lines are joined with “ · “. A property without a description now shows its name as the placeholder. Thanks to Andrii Oriekhov.

3.1.0 (2026-10-14)

Quick add: log a value in one tap

For the things you log many times a day (a glass of water, a set of calf raises, a cup of coffee), opening the full capture dialog was too much friction.

  • Quick add panel: run Life Tracker: Quick add or click the new ribbon icon. A small panel lists the properties you picked, each with its −/+ buttons, emoji buttons or checkbox. Every tap saves immediately.
  • Back-fill in place: with a daily note open, the panel edits that day. Otherwise it edits today. Use ‹ › to move between days.
  • One-tap links: obsidian://life-tracker-quick-add?property=water&increment adds one glass to today’s note without opening anything. Put it on your phone’s home screen (iOS Shortcuts, Android shortcut or widget). Links can also decrement, toggle, set=<value> and target a date=YYYY-MM-DD.
  • You choose what appears: turn on Show in quick add for a property in settings. It is off by default, so the panel stays short.

Faster capture

  • Auto-advance (optional): turn on Auto-advance after picking a value (Settings → Capture) and the capture dialog moves to the next property as soon as you pick from a dropdown, tap an emoji button or toggle a checkbox. Browsing a dropdown with the arrow keys does not count as a pick; press Enter instead. Thanks to Andrii Oriekhov for this one.
  • The first + on an empty counter now logs 1: on a property whose range starts at 0, like water intake, the first tap used to log 0 and looked like nothing happened. − still sets 0, so “none today” stays one tap.

Fixes

  • Missing values no longer chart as 0: with a value mapping (e.g. none → 0, mild → 1), a day where the property was never filled in showed up as “none” on heatmaps and charts and pulled averages down. It now stays empty. Thanks to Andrii Oriekhov.

3.0.0 (2026-09-27)

⚠ BREAKING CHANGES

  • plugin: requires Obsidian 1.13.0 (minAppVersion 1.12.0 -> 1.13.0). Users on Obsidian 1.12 keep 2.24.4 through versions.json.

Claude-Session: https://claude.ai/code/session_01LM4hi11kohPVqgZNLpjRgh

Features

  • plugin: declare the settings for Obsidian 1.13’s settings API

Bug Fixes

  • build: exclude bun-types alongside @types/bun from the release-age gate
  • build: harden the release path from the template
  • build: rebuild versions.json from the published releases
  • plugin: lowercase the newsletter line

2.24.4 (2026-09-03)

2.24.3 (2026-09-03)

Bug Fixes

  • capture properties of a freshly created note instead of reporting none

2.24.2 (2026-08-31)

Bug Fixes

  • plugin: show a completion rate instead of a record for checkboxes

2.24.1 (2026-08-30)

Bug Fixes

  • plugin: survive a Templater settings migration

2.24.0 (2026-08-30)

Features

  • build: fail the build on a lockfile the catalog review cannot parse
  • build: make the rule floor check that it is still wired in
  • build: refuse commits that loosen the rules instead of fixing the finding
  • plugin: offer to create today’s note when there is none #160
  • plugin: resolve and create the note a capture is missing
  • plugin: resolve where a periodic note for a date should live

Bug Fixes

  • plugin: line up the property definition rows

2.23.1 (2026-08-29)

Bug Fixes

  • build: align with the catalog reviewer’s archive, ruleset and audit
  • build: harden the sentence-case exemptions after adversarial review

2.23.0 (2026-08-19)

Features

  • plugin: add a range chart for start-to-end spans #81
  • plugin: let charts plot note names on the x-axis
  • plugin: track and celebrate personal records

Bug Fixes

  • plugin: accumulate the target line under a running total
  • plugin: draw the target and the reference line together
  • plugin: give the progress ring its own icon
  • plugin: keep heatmap month labels from overlapping
  • plugin: stop modal labels from sliding under the inputs

2.22.0 (2026-08-19)

Features

  • plugin: add a high contrast mode
  • plugin: add goals, targets and a progress ring #126
  • plugin: color progress rings by the goal’s direction

Bug Fixes

  • plugin: hide the drag handle on a maximized card
  • plugin: inspect on first tap, open on second
  • plugin: scope filename date patterns to their folder
  • plugin: span heatmaps over the whole selected period
  • plugin: treat a missing measurement as unknown, not zero

2.21.4 (2026-08-12)

Bug Fixes

  • plugin: color numeric pie segments with the heatmap value scale (#150)
  • plugin: label the trend as per-period on running-total charts (#149)
  • plugin: show a persistent label on the required property toggle (#148)
  • plugin: wrap property row controls so inputs stay usable on mobile (#147)

2.21.3 (2026-08-12)

Bug Fixes

  • plugin: maximize the clicked graph, not its property sibling (#151)

2.21.2 (2026-08-12)

Bug Fixes

  • plugin: apply the default value to the editor in the capture modal (#145)
  • plugin: refresh the view when the time granularity changes (#146)

2.21.1 (2026-08-11)

Bug Fixes

  • plugin: address adversarial review findings on the 2.21.0 changes, closes 143/#144 #144
  • plugin: rebuild the chart when a property flips between numeric and list

2.21.0 (2026-08-11)

Features

  • plugin: add a running total option for line and area charts (#142)

Bug Fixes

  • plugin: keep the visualization settings toolbar inside the dialog (#143)
  • plugin: show the column layout icons and let charts fill the card (#144)

2.20.2 (2026-08-01)

Bug Fixes

  • plugin: show the Starter Kit tab only when Starter Kit is present

2.20.1 (2026-07-31)

Bug Fixes

  • build: only record a versions.json entry when the minimum changes

2.20.0 (2026-07-30)

Features

  • plugin: custom heatmap color mappings and colorblind-friendly palettes #136 #82 #136
  • plugin: import linked property definitions from Obsidian Starter Kit
  • plugin: link Starter Kit properties by stable id so renames survive
  • plugin: value polarity and value/range emojis #22 #21 #22 #21 #21 #22

Bug Fixes

  • build: record every release in versions.json, and lint before tagging
  • plugin: keep display names on link, and make Starter Kit import scale
  • plugin: serialize settings writes, editable map keys, heatmap auto scheme, closes 21/#22

2.19.0 (2026-07-30)

Features

  • plugin: pinned cards, progressive rendering, quick number entry, mobile swipe #123 #125 #135 #140

2.18.0 (2026-07-30)

Features

  • plugin: custom filename date patterns
  • plugin: show what’s new in a tab instead of a modal dialog
  • plugin: surface support CTAs everywhere users can see them

2.17.0 (2026-07-29)

Features

  • plugin: aggregate what’s new dialogs across simultaneously updated plugins

2.16.0 (2026-07-29)

Features

  • plugin: add Knowii community to the what’s new dialog and harden it

2.15.0 (2026-07-27)

Features

  • plugin: capture modal quick wins (#106)
  • plugin: chart tooltip polish (#103)
  • plugin: configurable number slider step + min/max feedback (#107)
  • plugin: scatter chart real time axis + stack-safe min/max (#97)
  • plugin: show a what’s new dialog once after plugin updates

Bug Fixes

  • plugin: allow decimal values in number property inputs

2.14.2 (2026-07-17)

2.14.1 (2026-06-17)

2.14.0 (2026-06-17)

Features

  • plugin: heatmap sum aggregation and configurable week start (#98, #99)

Bug Fixes

  • plugin: apply per-card config changes without a full-grid rebuild
  • plugin: keep the dashboard stable during full re-renders

Performance Improvements

  • plugin: debounce visualization rebuilds on data updates

2.13.0 (2026-06-10)

Features

  • plugin: add ARIA roles and keyboard navigation across the UI
  • plugin: add moving average overlay and trend indicators #21 #101
  • plugin: anchor the trend arrow to the title and add a trend row
  • plugin: export charts as PNG and displayed data as CSV
  • plugin: polish animations across cards and the capture carousel

Bug Fixes

  • plugin: keep date editor values on the local calendar day
  • plugin: keep heatmap legend visible while scrolling
  • plugin: keep heatmap streak stats visible while scrolling
  • plugin: keep reference lines visible outside the data range
  • plugin: let the visualization options column scroll in the popover
  • plugin: pin legend and trend/streak rows to the card bottom
  • plugin: prevent stale chart instances after rapid re-renders
  • plugin: resolve batch capture provider by most recent interaction
  • plugin: show a single tooltip on the trend indicator
  • plugin: stop leaking viewport listeners on grid view re-renders
  • plugin: stop spurious render cache invalidation after GC
  • plugin: use the Obsidian-styled tooltip on the trend indicator

2.12.0 (2026-06-10)

Features

  • plugin: add capture today command
  • plugin: respect reduced motion preference and restore focus rings
  • plugin: show streak stats on heatmaps #100

Bug Fixes

  • plugin: flush pending grid view edits before re-render teardown
  • plugin: render missing chart values as gaps instead of zeros
  • plugin: validate capture modal auto-saves and surface save failures

2.11.0 (2026-06-02)

Features

  • plugin: support sum aggregation for chart visualizations

2.10.0 (2026-06-02)

Features

  • all: added option to hide header buttons

Bug Fixes

  • all: fixed heatmap colors

2.9.0 (2026-05-19)

Features

  • all: automatically show newest data in heatmap visualizations

2.8.1 (2026-05-18)

Bug Fixes

  • all: fixed issue with previous year data colors in heatmaps

2.8.0 (2026-05-18)

Features

  • all: enable reordering charts in the Life Tracker base view

2.7.4 (2026-05-16)

Bug Fixes

  • plugin: update view option type definition (#84)

2.7.3 (2026-05-15)

Bug Fixes

  • plugin: filter null/undefined from multi-value property parsing

2.7.2 (2026-05-14)

2.7.1 (2026-05-13)

2.7.0 (2026-05-13)

Features

  • all: added docs
  • all: added release notes update
  • all: added support for hiding individual charts when there is an overlay
  • all: updated release script
  • all: updated scripts

2.6.2 (2026-01-30)

Features

  • all: added release and validate scripts

2.6.1 (2026-01-30)

Features

  • all: isolated styles and removed tw reset

2.6.0 (2026-01-05)

Features

  • all: added support for value mappings

2.5.0 (2026-01-03)

Features

  • all: added reference line support in visualization customizations
  • all: added support for reference lines on visualizations with multiple properties

Bug Fixes

  • all: fixed issue with maximizing charts with multiple props

2.4.0 (2026-01-03)

Features

  • all: add better support for lists. The values are now considered in isolation and aggregated correctly

Bug Fixes

  • all: fixed broken test

2.3.0 (2025-12-22)

Features

  • all: added support for creating visualizationss with multiple properties

2.2.1 (2025-12-20)

Bug Fixes

  • all: fixed default state for show empty values

2.2.0 (2025-12-17)

2.1.0 (2025-12-17)

Features

  • all: enabled adding multiple visualizations for the same property

2.0.0 (2025-12-16)

Features

  • all: enabled changing the time frame for the life tracking grid (base view options)

Bug Fixes

  • all: filtered the dataset given to the bulk processing command

1.9.0 (2025-12-16)

Features

  • all: enabled changing the time frame for the life tracker view
  • all: improved visualizations resizing based on available space

Bug Fixes

  • all: removed visualization as soon as a property is removed from the life tracker view

1.8.1 (2025-12-16)

Features

  • all: enabed copying an existing property definition

1.8.0 (2025-12-16)

Features

  • all: added more per-visualization customization options for heatmaps
  • all: enabled customizing visualization colors

Bug Fixes

  • all: better handled color customization for boolean pie and doughtnut charts
  • all: fixed tooltip display for heatmaps

1.7.0 (2025-12-15)

Features

  • all: enabled using default values in the data entry modal
  • all: made the grid responsive (becomes a cards view on mobile)

1.6.0 (2025-12-15)

Features

  • all: added support for rendering visualizations for formulas
  • all: added support for rendering visualizing properties (eg file tags as a cloud)
  • all: better handled different chart types and fixed rendering
  • all: enabled reordering property definitions
  • all: harmonized label generation across all chart types
  • all: normalized chart sizes
  • all: reduced the number of visualization re-renders after configuration or data changes
  • all: removed the card height setting in the Life Tracker Base view

Bug Fixes

  • all: added some delay to validations in the grid to avoid losing input focus too quickly
  • all: fixed issue where the visualization context menu did not reflect the current state
  • all: fixed label positioning for timeline chart
  • all: fixed labels for timeline charts
  • all: stop animations when maximizing/minimizing charts
  • all: the cached data is now updated correctly when base data changes

1.5.0 (2025-12-14)

Features

  • all: added mobile support for the data entry modal

1.4.0 (2025-12-14)

Features

  • all: better handle the date anchor setting and add support for more date/time formats
  • all: display boolean values more nicely (True False instead of true false)
  • all: improved performances of the Life Tracker view

Bug Fixes

  • all: fixed rendering of the property edition modal (space for slider vs space for input)

1.3.0 (2025-12-14)

Features

  • all: assigned colors based on value for boolean data
  • all: improved performances by limiting re-rendering
  • all: improved rendering of line charts

Bug Fixes

  • all: improved rendering of heatmap visualizations (fixed misalignment)

1.2.0 (2025-12-13)

Features

  • all: added batch mode support for the command and modal
  • all: added capture command and a new grid base view type
  • all: enhanced handling of empty/null values in visualizations (new setting)
  • all: improved navigation across properties with the modal
  • all: improved validation in modal and grid. Only valid values may be entered now

Bug Fixes

  • all: fixed bug where the heatmap color did not changed according to the setting

1.1.1 (2025-12-12)

Bug Fixes

  • all: fixed issue where after minimizing a maximized card, another was maximized
  • all: fixed the release workflow to name the tags correctly

1.1.0 (2025-12-12)

Features

  • all: avoid fully recreating the base view when grid settings are changed (eg number of columns)
  • all: renamed the plugin (wider scope)

1.0.0 (2025-12-12)

Bug Fixes

  • all: fix matching between columns and global visualization presets

0.2.0 (2025-12-12)

Features

  • all: added new visualization types

Bug Fixes

  • all: fix issue with settings update

0.1.0 (2025-12-12)

Features

  • all: adapt visualizations based on date granularity
  • all: added github ci and release workflows
  • all: added plugin shell
  • all: added release scripts
  • all: added setting for the animation duration
  • all: handle copying the assets in the build script and also copying the required files
  • all: improve the display and controls
  • all: improved animations (show values over time)
  • all: initial implementation (vibe-coded)
  • all: removed animations for heatmaps (nok)
  • all: updated build to also take care of the CSS with Tailwind
  • build: handle copying manifest.json and versions.js in the build script